Tel: +27 (0)21 975 8894
Email: sales@ri-tech.co.za

PCI & PCIe I/O Boards

PCIe-CPL64: 2-CH PCI Express® PoCL Frame Grabber

  • PCI Express® x4 compliant
  • PoCL (Power over Camera Link®) compliant with auto detection
  • Supports 2-CH Camera Link® Base configuration
  • Acquisition pixel clock rates up to 85 MHz on each Ch
  • 128 MB of 200 MHz DDR SDRAM for acquisition
  • 4 TTL Digital Input/Output, and 2 trigger Input
  • Supports 64-bit memory addressing
  • Two serial communication ports
Rugged Interconnect Technologies TM - PCIe-CPL64

PCIe-RTV24: 4-CH PCI Express Real-time Video Capture Card for Standard Cameras

  • Four color video digitizers operating in parallel
  • PCI Express® x1 lane, up to 120 fps
  • Color (PAL⁄NTSC), monochrome (CCIR⁄EIA) camera supported
  • Up to 16 channels extension
  • On-board TTL I⁄O lines
  • Built-in watchdog timer
  • User friendly ViewCreator utility
  • Software trigger supported
Rugged Interconnect Technologies TM - PCIe-RTV24

GIE64+: 4-CH PCI Express® GigE Vision Power over Ethernet Frame Grabber

  • PCI Express® x4 compliant
  • Support for four independent Gigabit Ethernet ports
  • Support for IEEE 1588, PTP technology
  • Support for IEEE 802.3af for PoE (Power over Ethernet)
  • Support for jumbo frames (9 KByte)
  • Support for link aggregation
  • Powered Device (PD) auto detection and classification
Rugged Interconnect Technologies TM - GIE64+

GIE62+: 2-CH Gigabit Ethernet Frame Grabber Supporting Power over Ethernet

  • PCI Express® x4 compliant
  • Supports two independent Gigabit Ethernet ports
  • Supports PoE (Power over Ethernet), IEEE 802.3af compliant
  • Supports jumbo frames (9 KByte)
  • Supports Link aggregation
  • Powered Device (PD) auto detection and classification
  • Provides industrial screw lock connector
Rugged Interconnect Technologies TM - GIE62+

PCIe-2602: 2-CH 3G-SDI Video/Audio Capture Card

  • Support for 2-CH 3G-SDI video signal, up to 1920 x 1080/60fps video stream
  • Low latency, uncompressed video streaming
  • High accuracy colour format support, 12 bit 4:4:4 1080i/60fps or 10 bit 4:2:2 1080P/60fps
  • Cabling distances up to 100m (w/ compatible 75Ω coaxial cable)
  • Directshow support
  • RS-485 and digital I/O provided
  • PCI Express x4 compliant signal
  • Connection Status LED indicator
Rugged Interconnect Technologies TM - PCIe-2602

HDV62: HDTV Frame Grabber / HDMI Video Capture Card

  • Uncompressed 1920 x 1080p, 60 fps video streams
  • Supports both digital, and component analog video inputs
  • PCI Express® x4 interface
  • Hardware color space conversion
  • 512 MB of DDR2 SDRAM frame buffer
  • Configurable EDID
  • 4 TTL digital inputs/outputs and 1 trigger output
Rugged Interconnect Technologies TM - HDV62

PCIe-9852: 2-CH 14-Bit 200 MS/s High-Speed PCI Express Digitizer/Oscilloscope

  • PCI Express specification Rev. 2.0 compliant
  • 2 simultaneously analog inputs, up to 200 MS/s sampling rate, and High resolution 14-bit ADC
  • Up to 90 MHz bandwidth for analog input
  • 1 GB onboard storage memory
  • Programmable input voltage range of ±0.2 V, ±2 V, or ±10 V
  • One external digital trigger input and one external trigger output
  • Full auto-calibration
  • Support signal averaging feature
Rugged Interconnect Technologies TM - PCIe-9852

PCI-9816/9826/9846: 4-CH 16-Bit 10/20/40 MS/s PCI Digitizers/Oscilloscopes with 512MB Memory

  • Standard height, half length PCI form factor
  • 4-CH simultaneous single-ended AI
  • 16-bit high resolution A/D converter
  • Up to 10MS/s, 20MS/s and 40MS/s per channel
  • 512MB on-board memory for data storage
  • Software selectable 50Ω or 1 MΩ input impedance
  • Programmable input voltage range: ±1 V, ±0.2 V and ±5V, ±1V
  • Multiple module synchronization via SSI
Rugged Interconnect Technologies TM - PCI-9816/9826/9846

PCI-9527: 24-Bit High-Resolution Dynamic Signal Acquisition and Generation

  • 24-Bit Sigma-Delta ADC and DAC
  • 2-CH simultaneous sampling analog input
  • 2-CH simultaneous updated analog output
  • 432 KS/s maximum sampling rate with software
  • Programmable input range: ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V
  • Programmable output range: ±10 V, ±1 V, ±0.1 V
  • AC or DC input coupling, software selectable
  • Trigger I/O connector for external digital trigger signal
Rugged Interconnect Technologies TM - PCI-9527