Tel: +27 (0)21 975 8894
Email: sales@ri-tech.co.za

COM Express Type-10

MC10K1A40VHA: Quad Core ARM with 192 Kepler GPU Cores COMe Type-10

  • NVIDIA TegraK1 SOC wih Quad Core 2.0GHz ARM Cortex-A15, 192Kepler GPU Cores
  • Peak performance at 327 GFLOPS
  • 2GB DDR3L SDRAM and 4GB eMMC Flash
  • 1x Gigabit Ethernet port 
  • 1x SATA interface (3Gb/s) 
  • Integrated Graphics HDMI/LVDS 
  • 4x USB2.0 ports and 1x USB3.0 port
  • 1xPCIe®x2Gen2 (SKU-A)
  • 8x GPIO ports 
  • Stereo line Out/stereo line In 
  • Pre-mounted heatsink/spreader for optimal cooling
  • Optional conformal coating 
  • CUDA™6.0, VisionWorks™, Linux® 
Rugged Interconnect Technologies TM - MC10K1A40VHA

TQMxE38M: COM Express™ Mini Module (Type 10)

  • Intel® Atom™ E3800 ("Bay Trail-I")
  • Up to 8 GB DDR3L with ECC support, soldered
  • Optimized for ultra low power
  • Extended temperature support 
  • Reach featured uEFI BIOS with easy-config, multi-setup and touch-support
  • TQMx86 board-controller with customer specific expandability (flexiCFG)
  • USB 3.0 device interface
  • TPM 1.2 / 2.0
  • iRTC (highly accurate Industrial Real-Time-Clock)
  • "Green ECO-Off" (minimum of standby power)
  • Watchdog and thermal management
  • Highest reliability, 24/7 certified
  • Extra robust Design
  • Formal coating capability
  • COM Express™ Mini Type 10 (COM.0, R 2.1)
Rugged Interconnect Technologies TM - TQMxE38M

nanoX-TC: Mini size COM Express® Type 10 Pinout Compatible Module with Intel® Atom™ Processor E6xx and EG20T PCH

  • Intel® Atom™ Processor E6xx from 600 MHz up to 1.6 GHz
  • Up to 2 GB soldered DDR2 SDRAM at 800 MHz
  • 24-bit LVDS and SDVO support
  • 4x PCI Express x1 lanes
  • Optional Intel® Platform Controller Hub EG20T for USB, LAN, SDIO, Serial & CAN bus and SATA
  • COM Express® COM.0 R2.0 Type 10 Pinout
  • Mini form factor 84 x 55 mm
Rugged Interconnect Technologies TM - nanoX-TC

nanoX-BT: Mini COM Express® Type 10 Module with Intel® Atom™ or Celeron® Processor (Formerly Bay Trail)

  • Single, Dual, Quad-Core Intel® Atom™ or Celeron® Processor
  • Up to 4GB soldered Dual Channel DDR3L at 1333MHz
  • Two DDI channels (optional LVDS)
  • Three PCIe x1, GbE
  • Two SATA 3Gb/s, one USB 3.0, seven USB 2.0
Rugged Interconnect Technologies TM - nanoX-BT

nanoX-TCR: Extreme Rugged™ COM Express® Type 10 Mini-size Computer-on-Module with Intel® Atom™ Processor E6xxT

  • Intel® Atom™ Processor E6xx from 600 MHz up to 1.6 GHz
  • 1GB soldered DDR2 SDRAM at 800 MHz
  • 24-bit LVDS and SDVO support
  • PCI Express x1 lanes
  • Intel® Platform Controller Hub EG20T for USB, LAN, SDIO, Serial & CAN bus and SATA
  • Optional Solid State Drive up to 16 GB
  • COM Express® COM.0 R2.0 Type 10 Pinout, Mini form factor 84 x 55 mm
  • Extended Temperature: -40°C to +85°C
Rugged Interconnect Technologies TM - nanoX-TCR

nanoX-BASE: COM Express® Type 10 Reference Carrier Board

  • Six PCI Express® x1 (5 slots, 1 PCIe Mini Card slot)
  • PCIe-to-PCI bridge, two PCI™ slots
  • SDVO ADD2 card slot
  • LPC based Super I/O (enable/disable)
  • SDIO/MMC support, multiplexed on GPIO
  • Dual BIOS (both LPC and SPI)
  • Compatible with PICMG® COM Express® Carrier Design Guide
Rugged Interconnect Technologies TM - nanoX-BASE

Starter Kit – nanoX: This Computer-on-Module Starter Kit gets you going with Carrier Board Design and Software Verification in no time.

  • COM Express® Type 1/10 core module
  • Thermal solution (heatspreader or heatsink)
  • nanoX-BASE Reference Carrier Board
  • LVDS flat panel evaluation kit
  • Schematics, Design Guide, and User Manuals
  • ADLINK USB stick with Documentation, Drivers, BSPs, Libraries
Rugged Interconnect Technologies TM - Starter Kit – nanoX

No results found

No results found